The A10VSO pump utilizes a swashplate design that allows for the flow rate to be directly proportional to the drive speed and displacement. With the ability to steplessly adjust the swashplate angle, operators can achieve precise control over hydraulic flow, making…
Pressure Gauge Model: 212.53, 213.53
Pressure Gauge Model: 212.53 and 213.53 Shop Now Size Reading Connection Position Size 2 inch(213.53.50) 2.5 inch (213.53.63) 4 inch (213.53.100) Reading Bar PSI MPA Or Mix (Bar/PSI) Connection BSP NPT Position Back Bottom Lower Back The liquid-filled model 213.53 mechanical Bourdon tube…
Oil Filtration
Hydraulic oil is the most important component in a hydraulic system. And 75% of hydraulic system failures come from contaminated oil. As hydraulic fluid flows through the system, it can pick up contaminants such as dirt, debris, and metal particles, which…
Water Contaminant
Water is one of the most common contaminants in hydraulic oil and can cause a range of problems if not properly addressed.Normally, water behaves in the oil like water in the air. Every oil is able to absorb a certain volume…